straightening and cutting machine
1. it applies to a series of different kinds of steel bars
2. highly automatic, work constantly, very safe.
1.Introduction:
The steel coil straightening and cutting machine is used to straightening wire or rebar, and then
cut it into the needed length. It can do a prepare work for the wire mesh welding machine.
1,This straightening and cutting machine adopts Weft Wire Position Device. It could fix weft
wire exactly on position ,which is easy to operate with simple structure .
2,There is a closed straighten and inputing system for weft wire .Warranty weft wire was input and
straightened continuously .,
3,Weft wire Stop Device .This device could stop the machine working when weft wire is
finished or cut ,avoid damage without wires.
4,This machine not only could produce a wide mesh ,but also could produce two narrow meshes
at the same time as your requirement.
5,Electrode adopts chrome ,zirconium ,copper as material ,enjoying long -lived service.
2. Features:
1. Fast in straightening and cutting: Speed: 110m/min
2. Accurate measurement:≤±1mm
3. low failure rate: work with high performance for a long time under normal condition after debugging
4. Precise straightening : the straightness of straightening wire is ≤±1mm
5. Arrangement of the wire : Min is 1mm, Max. is 16mm
3. Main parameter:
|
Model
|
Wire dia.(mm)
|
Cutting length
|
Speed (m/min)
|
Power
|
Weight
|
Dimension
(mm)
|
|
CT0.3-1
|
φ0.3-1
|
300-600
|
54-108
|
1.1KW
|
100Kg
|
1000*500*700
|
|
CT1.6-6
|
φ2-6
|
600-6000
|
110
|
2.4KW
|
1000Kg
|
7750*600*1260
|
|
CT3-8
|
φ3-8
|
100-6000
|
40
|
5.5KW
|
700Kg
|
7250*550*1150
|
|
CT5-12
|
φ5-12
|
2000-12000
|
40-60
|
12.1KW
|
1500Kg
|
13770*535*1457
|
|
CT4-14
|
φ4-14
|
800-12000
|
40
|
11.5KW
|
1450Kg
|
1430*700*900
|
|
CT5-12
|
φ5-12
|
1000-12000
|
120
|
30KW
|
5000Kg
|
18000*5000*2000
|
|
CT6-14
|
φ6-16
|
3000-12000
|
120
|
24KW
|
3500Kg
|
14000*500*1260
|
4. Sales Service.
1.Two engineer will arrange to the buyer’s country to adjust and operate the machine (USD100/day)
2.The buyer should pay the plane ticket and responsible for the accommodation .
3.The guarantee time is one year, if any part of the machine broken during the period time,
the seller responsible for repairing the machine for free.
|
|
High speed straightening and cutting machine Images
|
